Smart light-emitting diode (LED) bulbs are networked devices that produce information-carrying output. This study asks whether that light can carry digital data through changes small enough to be difficult for a person in the room to notice. To explore this covert communication channel, we tested an unmodified smart bulb (Philips WiZ A19) using a camera as the receiver. Binary data were encoded programmatically in nearly matched color and brightness changes. Because the differences were deliberately small across 16 million color steps, the receiver periodically measured known reference states and used them to compensate for changes in the camera and background room illumination. The color method successfully transmitted the short message 'hi' using a color difference (E) of 0.5, a standard measure of perceptual color distance. The receiver recovered 99% of the transmitted bits, and the complete message passed an integrity check. The brightness method remained decodable at the smallest nonzero integer difference tested, alternating between dimming settings 56 and 54, with 96.2% mean bit accuracy across two runs. When both binary symbols were assigned to the same brightness in a control experiment, accuracy fell to approximately chance. These results show that the visible output of an ordinary smart bulb can serve as a low-rate data channel without hardware modification. Camera color drift can overwhelm small signals unless the receiver is recalibrated during transmission, sudden changes in ambient light can disrupt decoding, and longer messages require stronger error correction. The color experiment operated at a difference below a conventional threshold for human color discrimination. The corresponding perceptual limit for the brightness method has not yet been established experimentally.

翻译：暂无翻译