The introduction of Reconfigurable Intelligent Surfaces (RIS) technology marks a transformative era in modern communication systems, enhancing coverage and facilitating higher data transmission rates. While recent research has delved into the integration of RIS into satellite networks, a critical and practical gap persists concerning its implementation in the satellite-Very Small Aperture Terminal (VSAT) downlink, specifically amplifying contributions from the VSAT side. This paper addresses this gap by proposing a simple and engineering methodology to optimize RIS position and orientation, incorporating considerations for the antennas' radiation patterns and the system's topology to streamline optimization variables. The primary objective of this paper is to alleviate the double fading constraint in the reflect link without the need for active elements, achieved by leveraging the Fresnel zone of the RIS. The improvement power ratio depends on the frequency and the VSAT 's diameter. The results show that for a VSAT with diameter 1m the gain is up to 9dB at 2 GHz (S band) and up to 14dB at 4 GHz (C band). Additionally, the RIS channel equation is refined, encompassing the tropospheric attenuation and accounting for electromagnetic wave polarization.

翻译：暂无翻译