Accurate and stable torque rendering is essential for safe and perceptive human--machine interaction. Magnetorheological fluid (MRF)-based actuators offer a compact and rapidly controllable solution for haptic feedback, but their practical implementation requires reliable fluid sealing, low-hysteresis excitation, accurate torque control, and stable long-duration operation. This article presents an integrated MRF haptic system featuring a compact magnetically self-sealed rotary actuator, low-hysteresis PWM operation, high-fidelity model-based torque rendering, and stable performance during long-time operation. Magnetostatic simulation guides the arrangement of magnetic and nonmagnetic materials to focus flux in the multidisk torque and permanent-magnet sealing regions, enabling a maximum 600 N$\cdot$mm/A output. Experiments show that higher PWM frequencies reduce hysteresis and improve repeatability. At 10 kHz, the response is represented by a nonlinear model that varies with the direction and speed of torque change. The real-time controller combines feedforward, hysteresis compensation, PI feedback, and sliding-mode correction. Compared with PID, it reduces square-wave overshoot, undershoot, and steady-state RMSE by 77.4\%, 61.9\%, and 68.3\%, respectively. It tracks sinusoidal and biomechanics-model-based references, and a 1.5-h test shows only a 2.5 $^\circ$C rise near the coil with no clear tracking loss. This high-fidelity torque rendering will fundamentally transform human--robot collaboration by making interactions safer, more efficient, and more intuitive.

翻译：暂无翻译